Strap Mount Setup
Wrap the Strap Mount around the desired mounting area with both the front and rear panels firmly in place, looping the belt as shown to allow for tightening.
Pull the strap as tight as possible and secure the excess strap as shown. This step is crucial to ensure stability.
Move the handle from right to left, locking the Strap Mount securely in place.
Refer to the following video guide for further details.
Note: While the magnetic panels assist during setup, they alone do not secure the mount. Be sure to properly tighten the straps and use the handle to lock the mount. Incorrect setup may affect the safety and performance of your VOLTRA I, and failure to follow these steps could impact your warranty coverage.
If you have any questions or need further assistance, don’t hesitate to reach out to our support team at [email protected].