What rack specifications are required for compatibility?
The Lat Extension is designed to fit racks with the following specifications:
Hole Size: 1" (standard configuration)
Center-to-Center Hole Spacing: 3.64" – 6.2" (92.5 – 157.5 mm)
The product comes standard with 1" bolts for installation.
Can it be installed on racks with 5/8" holes?
Yes, the Lat Extension can also be installed on racks with 5/8" holes, with the following considerations:
You will need to source 5/8" bolts and nuts separately
Ensure all hardware is properly sized and securely fastened for safe use
What assembly hardware is included in the box?
M24 × 140 Hex Bolt × 2
M24 × 43 × 4 Flat Washer × 4
M24 Spring Washer × 2
M24 Nut × 2
⚠️ Important Notes
Ensure all components are securely mounted before use
Improper hardware or installation may affect safety and performance
Dimension Drawings
👉 Please refer to the images below for full specifications and dimensional details of the Lat Extension.
