Skip to main content
All CollectionsVOLTRA I and Accessories
DIY Dock Installation Reminder
DIY Dock Installation Reminder

We’ve included a supplementary DIY Dock installation guide that should assist with your setup.

Updated this week

• Base Plate Requirements

Steel: Minimum 5mm thick (purchase M4 over 20mm screws if over 8mm).

Aluminum: Minimum 10mm thick (purchase M4 screws over 20mm separately).

Wood: Not recommended.

• Drill Bit Size

Recommended: 5/32–11/64 inch (4–4.5mm).

Did this answer your question?